Nexxt Acrux3000 User Manual page 69

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
Click the Start button to initiate the Network
Sharing service.
Click the Stop button to cancel the Network Sharing
service.
Click the Eject Disk button to safely remove the USB
storage device that is connected to the USB port.
This takes the drive offline. A message will appear
on your web browser when it is safe to detach the
USB disk.
Click the Rescan button to start a new scan.
Follow the instructions below to set up your router
as a file server:
1. Plug an external USB hard disk drive or USB flash
drive into this router.
2. Click the Rescan button to find the USB drive that
has been attached to the Router. The following
screen will appear, as shown below.
3. To specify a volume that the Network Sharing
users can access, click the Edit link in the
Properties column and configure the
corresponding settings in figure 4-31.
4. Set the Network Sharing user's username and
password on the User Accounts page.
5. Click the Start button to initiate the Network
Sharing service.
6. Network Sharing users within your local network
69