Nexxt Acrux3000 User Manual page 13

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
The following parts are located on the rear panel
(View from left to right).
POWER: This is the power socket where you will
*
connect the power adapter. Please use only the
power adapter supplied to connect the device to
the AC mains.
RESET:
*
Two methods are available to reset to the router to
its factory default configuration:
1) Go to the Factory Default option on
System Tools -> Factory Default page
included in the router's Web-based Utility.
2) Use the Factory Default Reset button:
Press the Reset button for five seconds
and then wait for the Router to reboot.
USB: Connect with USB Mass Storage Device.
*
WAN: This WAN port is where you will connect the
*
DSL/cable Modem, or Ethernet
1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect
*
the Router to the local PC(s)
Wireless antenna: To receive and transmit the
*
wireless data.
13