Nexxt Acrux3000 User Manual page 58

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
Figure 4-21 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry,
follow these instructions:
1. Enter the appropriate MAC Address into the MAC
Address field. The format of the MAC Address is
XX-XX-XX-XX-XX-XX (X represents any hexadecimal
digit). For example: 00-0A-EB-00-07-8A.
2. Enter a short description of the wireless station
in the Description field. For example: Wireless
station A.
3. Status – Select Enabled or Disabled as the status
for this entry, from the Status pull-down list.
4. Click the Save button to store this entry.
To modify or delete an existing entry:
1. Click the Modify button next to in the entry you want
to change. If you want to erase this entry, click on
Delete.
2. Proceed with the changes you want to make.
3. Click the Save button to save your settings.
Click the Enable All button to activate all entries
Click the Disabled All button to cancel all entries.
Click the Delete All button to erase all entries
Click the Next button to go to the following page
Click the Previous button to return to the last page.
For example: If you want wireless station A with
MAC address 00-0A-EB-00-07-8A and wireless
58