Nexxt Acrux3000 User Manual page 52

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
clients are 802.11n.
11bg mixed - Select it when you are using both
802.11b and 802.11g wireless clients.
11bgn mixed - Select it when you are using a mix
of 802.11b, 11g, and 11n wireless clients.
Select the desired wireless mode. When
802.11g mode is selected, only 802.11g wire-
less stations can connect to the Router. When
802.11n mode is selected, only 802.11n
wireless stations can connect to the AP . It is
strongly recommended that you set the Mode to
802.11b&g&n, and all of 802.11b, 802.11g,
and 802.11n wireless stations can connect to
the Router.
Channel width - Select any channel width from
*
the pull-down list. The default setting is automatic,
designed to instantly adjust the channel width of
clients
Note:
When 11b only, 11g only, or 11bg mixed is
selected in the Mode field, the Channel Width
field will turn grey, showing a fixed setting of 20M,
which remains unchanged.
Max Tx Rate - Use this field to limit the maximum
*
Tx rate of the router.
Enable Wireless Router Radio - The wireless
*
radio of this router can be enabled or disabled to
allow wireless stations access.
Enable SSID Broadcast - When wireless clients
*
survey the local area for wireless networks to
associate with, they will detect the SSID broad-
cast by the router. If you select the Enable SSID
Broadcast checkbox, the wireless router will start
broadcasting its name (SSID) over the air.
52