Nexxt Acrux3000 User Manual page 41

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
necessary for your ISP . In most cases, leaving
these fields blank will work.
ISP Specified IP Address - If your ISP does not
*
automatically assign IP addresses to the router
during login, please click "Use IP address speci-
fied by ISP" check box and enter the IP address
provided by your ISP in dotted-decimal notation.
Detect online interval - Access Concentrator
*
online detection that the router will run at the
specified interval. The default value is "0". You can
select any number between "0" and "120". A "0"
setting means no detection.
DNS IP address - If your ISP does not automati-
*
cally assign DNS addresses to the router during
login, please click "Use the following DNS servers"
check box and enter the IP address in dotted-deci-
mal notation of your ISP's primary DNS server. If a
secondary DNS server address is available, enter
it as well.
Click the Save button to store your settings.
4. If your ISP provides BigPond Cable (or Heart Beat
Signal) connection, please select BigPond Cable.
Proceed to fill in the following parameters, as
shown below (Figure 4-10):
41