Nexxt Acrux3000 User Manual page 64

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
DHCP Server - Enable or Disable the DHCP
*
server. If you disable the Server, you must have
another DHCP server within your network.
Otherwise, you must configure the computer
manually.
Start IP Address - Specify an IP address for the
*
DHCP Server to start with when assigning IP
addresses. 192.168.0.100 is the default start
address.
End IP Address - Specify an IP address for the
*
DHCP Server to end with when assigning IP
addresses. 192.168. 0.199 is the default end
address.
Address Lease Time - The Address Lease Time
*
is the amount of time a network user will be
allowed connection to the Router with their
current dynamic IP Address. Enter the amount of
time in minutes that this dynamic IP Address will
be "leased" to the user. After the time is up, the
user will be automatically assigned a new dynamic
IP address. The range of the time is 1 ~ 2880
minutes. The default value is 120 minutes.
Default Gateway - (Optional) This field is used
*
to enter the IP address of the LAN port of the
router, default value is 192.168. 0.1
Default Domain - (Optional) This field is used to
*
enter the domain name of your network.
Primary DNS - (Optional) This field is used to
*
enter the DNS IP address provided by your ISP .
Consult your ISP if you do not have this value.
Secondary DNS - (Optional) This field is used to
*
enter the IP address of another DNS server if
your ISP provides two DNS servers.
64