Nexxt Acrux3000 User Manual page 61

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
DTIM Interval - This value indicates the interval of
*
the Delivery Traffic Indication Message (DTIM).
A DTIM field is a countdown field informing clients
of the next window for listening to broadcast and
multicast messages. When the Router has
buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with
a DTIM Interval value. You can specify the value
between 1-255 Beacon Intervals. The default
value is 1, which indicates the DTIM Interval is the
same as Beacon Interval.
Enable WMM - WMM function can guarantee
*
the packets with high- priority messages being
transmitted preferentially. It is strongly
recommended to have this feature enabled.
Enable Short GI - This function is enabled by
*
default and used to set the time the receiver
waits for RF reflections to settle out before
sampling data. Using a short Guard Interval can
increase throughput.
Enabled AP Isolation - This function can isolate
*
wireless stations on your network from each
other. Wireless devices will be able to
communicate with the Router but not with each
other. To use this function, check this box.
AP Isolation is disabled by default.
Note:
If you are not really familiar with the setting of the
items in this page, it is strongly recommended to
keep the default values unchanged; otherwise, it
may result in lower wireless network performance.
61