Nexxt Acrux3000 User Manual page 55

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
(any combination of 0-9, a-f, A-F, zero key is not
supported) or 16 ASCII characters.
Note:
If you do not set a passkey, the wireless
encryption feature remains disabled even if you
have selected Shared Key, as your Authentica-
tion Mode.
* WPA/WPA2 Enterprise - It is based on the
radius server.
Version - Choose the WPA encryption method
from the pull-down list. The default setting is
Automatic, which automatically sets WPA (Wi-Fi
Protected Access) or WPA2 (WPA version 2),
based on the wireless station's capability and
request.
Encryption - You can either select Automatic, or
TKIP or AES.
Note:
If you check the WPA/WPA2 radio button and
choose TKIP encryption, a notice in red will be
displayed, as shown below in Figure 4-18.
Figure 4-18
Radius Server IP - Enter the IP address of the
radius server.
Radius Port - Enter the port used by the radius
server.
55