Nexxt Acrux3000 User Manual page 15

Nexxt Solutions - ACRUX - Wireless N Gigabit Router
1. Power off your PC, Cable/DSL modem, and the
router.
2. Choose the optimum location for the router. The
best place is usually near the center of the area in
which your PC(s) will wirelessly connect.
3. Adjust the direction of the antenna. Placing the
antenna in the upright position often provides the
best performance.
4. Connect the PC(s) and each Switch/Hub in your
LAN to the LAN Ports on the router, as shown in
figure 2-1. (If you have a wireless NIC and want to
use the wireless function, you can skip this step.)
5. Connect the DSL/Cable Modem to the WAN port
on the Router, as shown in figure 2-1.
6. Connect the power adapter to the power socket
on the router, and the other end into an electrical
outlet. The Router will start to work automatically.
7. Power on your PC and Cable/DSL Modem.
Figure 2-1 Hardaware Installation
of the Wireless N Gigabit Router
15