Import A Flight Plan From An Sd Card; Insert A Waypoint In The Active Flight Plan - Garmin G1000 Reference Manual

Flight planning
5) Repeat step 3 and 4 to spell out the rest of the waypoint identifier.
6) Press the ENT Key and the cursor is now ready for entering of the next flight
plan waypoint.
7) Repeat steps 3 through 6 to enter the identifier for each additional flight plan
waypoint.
8) Once all waypoints have been entered, press the FMS Knob to remove the
cursor. The new flight plan is now active.

import a Flight plan From an sd Card

1) Insert the SD card containing the flight plan in the top card slot on the
MFD.
2) Press the FPL Key on the MFD to display the Active Flight Plan Page on the
MFD.
3) Turn the small FMS Knob to select the Flight Plan Catalog Page.
4) Press the FMS Knob to activate the cursor.
5) Turn either FMS Knob to highlight an empty or existing flight plan.
6) Press the IMPORT Softkey.
If an empty flight plan is selected, a list of the available flight plans on the
SD card will be displayed.
or:
If an existing flight plan is selected, an 'Overwrite existing flight plan? OK
or CANCEL' prompt is displayed. Press the ENT Key to choose to overwrite
the selected flight plan and see a list of the available flight plans on the SD
card. If overwriting the existing flight plan is not desired, select 'CANCEL'
using the FMS Knob, press the ENT Key, select another existing or empty
flight plan, and again press the IMPORT Softkey.
7) Turn the small FMS Knob to highlight the desired flight plan for importing.
8) Press the ENT Key.

insert a Waypoint in the aCtive Flight plan

1) Press the FPL Key to display the active flight plan.
2) If necessary, press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight the desired flight plan waypoint. The
new waypoint is inserted before the highlighted waypoint.
30
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
190-00748-02 Rev. B