Garmin G1000 Reference Manual page 116

appendix
• Existing Supplemental Database SD Card (010-00330-41, -42, or -43) from the
MFD. The supplemental data card from the MFD should be used because all
databases (except the active navigation database) are required to reside on this
card.
Jeppesen databases
NOTE: The Jeppesen aviation navigation database is now referred to as the
'navigation database'. Previously this database had been referred to as the
'aviation database'.
The ChartView database should be copied to the Supplemental Data Card which
will reside in the bottom card slot on the MFD. The navigation database is be loaded
from the Jeppesen or user supplied SD data card. Contact Jeppesen (www.jeppesen.
com) for subscription and update information.
The navigation database is loaded from an SD card inserted into the top card slot
of each displayed. The database is copied from the SD card in the top card slot to the
display' s internal memory.
loading updated databases
In some cases it may be necessary to obtain an unlock code from Garmin in order
to make the database product functional. It may also be necessary to have the system
configured by a Garmin authorized service facility in order to use some database
features.
Loading the Garmin database updates:
1) With G1000 system power OFF, remove the SD card from the bottom card
slot of each display.
2) Using a personal computer, update the Garmin databases on each SD card.
FliteCharts or ChartView databases are copied to the MFD SD card.
3) After all database cards are updated, insert each database SD card into the
bottom card slot of the appropriate display.
4) Apply power to the G1000 system, check that the databases are initialized
and displayed on the power-up screen.
100
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
190-00748-02 Rev. B