Garmin G1000 Reference Manual page 117

5) Acknowledge the Power-up Page agreement by pressing the ENT Key or
the right most softkey.
6) Turn the large FMS Knob to select the AUX Page group on the MFD.
7) Turn the small FMS Knob to select the System Status Page.
8) Press the Display Database Selection Softkey to show database information
for each display (MFD1 DB, PFD1 DB, PFD2 DB). Verify the correct
database cycle information is shown for each database for each display.
Loading the Jeppesen navigation database:
NOTE: Loading the Jeppesen navigation database prior to its effective date
will result in the expiration date on the power-up screen and the effective
date on the AUX-System Status Page being displayed in yellow.
1) Copy the new navigation database to an SD card obtained from Garmin, or
the aircraft manufacturer.
2) With the G1000 system OFF, insert the SD card containing the new
navigation database version into the top card slot of the MFD (label of SD
card facing left).
190-00748-02 Rev. B
Database Information on the Power-up Screen
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
appendix
101