Garmin G1000 Reference Manual page 68

hazard avoidance
ground mapping
1) Press the MODE Softkey.
2) Press the GROUND Softkey to place the radar in Ground Map Mode.
3) Press the BACK Softkey.
sector scan
1) While in the Horizontal Scan Mode, move the Joystick right or left to place
the Bearing Line in the desired position. The location of the Bearing Line
will become the center point of the Sector Scan.
2) Press the FMS Knob to display the cursor.
3) Turn the large FMS Knob to place the cursor in the SECTOR SCAN field.
4) Turn the small FMS Knob to select FULL, 60˚, 40˚, or 20˚ scan.
5) If desired, readjust the Bearing Line with the Joystick to change the center
of the Sector Scan.
6) Press the FMS Knob to remove the cursor.
antenna stabilization
1) To activate or deactivate the antenna stabilization, press the MODE
Softkey.
2) Press the STAB ON Softkey to activate antenna stabilization or press the
STAB OFF Softkey to deactivate. The current stabilization condition is
shown in the upper right of the weather radar display.
Weather attenuated Color highlight (WatCh
To activate or deactivate the WATCh
feature is only available in the horizontal Scan Mode.
Weather alert
To activate or deactivate Weather Alert, press the WX ALRT Softkey. Activating and
deactivating also enables or inhibits the alert on the PFD.
automatic standby
When the weather radar system is in the Weather or Ground Map Mode, upon
landing the system will automatically switch to Standby Mode.
52
Garmin G1000 Cockpit Reference Guide for the Cessna Caravan
)
®
® feature, press the WATCH Softkey. This
190-00748-02 Rev. B