2. Click Set OOB LAN IP.
The Set OOB LAN IP window is displayed
Figure 3-58. Set OOB LAN IP Window
3. Click the Out of Band LAN IP Address text box.
4. Enter an applicable switch IP address.
5. Click the Net Mask text box.
6. Enter an applicable switch net mask.
7. Click Apply.
If using IPv6, the user can manually enter an applicable static IPv6 address (in
hexadecimal format address/prefix) in the Out of Band LAN IP text box
(Figure
3-59).
July 2015
Doc. Number: G91930 Revision: 005US
(Figure
3-58).
®
Intel
True Scale Fabric Switches 12000 Series
User Guide
63