Snmp Target Configuration Window - Intel True Scale Fabric 12000 Series User Manual

Hide thumbs Also See for True Scale Fabric 12000 Series:

Table of Contents

Figure 3-22. SNMP Target Configuration Window

The top section of the window, SNMP Target Addresses, allows the user to determine

what type of SNMP traps are sent, and where they are sent. The rows provide an area

for specifying multiple trap destinations. The middle section, SNMP Address Form,

allows the user to record new SNMP address information for the applicable module. The

bottom section of the window, SNMP Target Parameters, allows the user to configure

each trap destination with version, optional security information, and filtering

mechanisms.

The Apply button applies the current settings to either the SNMP Target Addresses

or SNMP Target Parameters section. The Add button saves changes made to the

SNMP Address Form section.

Note:

The Target Configuration window is used for viewing and modifying existing SNMP

target entries. It is not used for creating new target entries.

To create a new target entry, use the following CLI command:

snmpTargetAddr add -n name -a addr [-p port] [-t timeout] [-r

retry_count] [-l tag_list] [-v parameters] [-s storage_type]

For example, to add a trap target with the IP address 192.168.0.123 that accepts

SNMP v2c style traps:

snmpTargetAddr add -n traphost1 -a 192.168.0.123 -v "v2 params"

Or, to add the same target except using SNMP v1 traps:

snmpTargetAddr add -n traphost1 -a 192.168.0.123 -v "v1 params"

3.4.1.1

Target Configuration Window Field Descriptions

The following are descriptions for each field in the Target Configuration window:

July 2015

Doc. Number: G91930 Revision: 005US

Intel

True Scale Fabric Switches 12000 Series

User Guide

Table of Contents