Figure 3-48. Set Field Thresholds Window
3. To change a threshold value for any field:
a. Click in the Threshold field.
b. Enter a new threshold value.
Note:
For those fields with a "Percent of Max" time unit, the user may enter a number from
0 to 100. For those fields with a "1 Second" time unit, the user may enter a number
from 1 to 65,535.
c.
Click Apply.
Note:
If any threshold is exceeded on any port, the port will be displayed as red on the switch
map and a warning message will be logged.
The following are descriptions for each field in the Set Field Thresholds area:
Note:
The thresholds for the following four fields are set as a percentage of maximum; that is
the percentage of maximum port capacity, which depending upon IB fabric
configuration can be:
• 4X (10/20Gbps)
• 1X (2.5Gbps)
portXmitDataThresh
The threshold for the number of 32-bit data words transmitted by the port.
portRecvDataThresh
The threshold for the number of 32-bit data words received by the port.
portXmitPktsThresh
The threshold for the number of data packets transmitted by the port.
portRecvPktsThresh
The threshold for the number of data packets received by the port.
®
Intel
True Scale Fabric Switches 12000 Series
User Guide
56
Doc. Number: G91930 Revision: 005US
July 2015