Subnet Manager Configuration File; Subnet Manager Configuration File Window - Intel True Scale Fabric 12000 Series User Manual

An event has occurred that has caused the slot mode to be set to disabled. The
user should resolve the error and reset the mode to the proper value for the
affected slot.
Note: The default settings for this window are as shown above. The user should not change
the defaults unless instructed by Technical Support.
3.5.4

Subnet Manager Configuration File

The Subnet Manager Configuration File window allows the user to upload and
download new Intel
and restart all applicable master and standby subnet managers using the new file.
1. From the Chassis View menu
The Subnet Manager Config File button is displayed
Figure 3-36. Subnet Manager Configuration File
2. Click Subnet Manager Config File.
The Subnet Manager Configuration window is displayed
Figure 3-37. Subnet Manager Configuration File Window
3. To download the current configuration file, right-click on the file name in the
Current config file text box, then choose either Save Target As or Save Link As
(depending upon which browser is being used) as displayed in
®
Intel True Scale Fabric Switches 12000 Series
User Guide
46
®
Fabric Manager embedded subnet manager files, as well as start
(Figure 3-1), select Config File Admin.
(Figure
(Figure
Doc. Number: G91930 Revision: 005US
3-36).
3-37).
Figure 3-38.
July 2015