Operation - Yetter 2968-026 Set-Up / Parts Manual

STEP 9:
Assemble nozzle tip (not supplied) to each 2968-218 injector holder. Injector tips can be ordered through
fertilizer equipment dealer. Calibrate the fertilizer pump and tips to maximum recommended pressure
of 30PSI and minimum 20PSI at the tip. Attach the fertilizer hose to the top side of each coupler.
POSITION
1
2
3
4
5
POSITION
1
2
3
4
5
INSTALLATION INSTRUCTIONS

OPERATION

- On dual fertilizer placement, the wheels are staggered front to back
to keep the soil from heaving.
- Fertilizer can be placed 2" – 3" off the seed furrow. Please see your
agronomist to determine best spacing on the rate that's being applied.
- - Calibrate the fertilizer pump and tips to maximum pressure of 30PSI
and minimum 20PSI at the tip.
- Residue managers are recommended if residue in planting conditions to
eliminate hair pinning.
- Blade replacement is necessary when the depth cannot be achieved or
the blade struggles to penetrate the ground.
- If there is buildup of damp soil on the planter gauge wheels or opener disks,
then conditions are less than ideal & some problems may also be
encountered with the fertilizer wheel.
- Seed depth will need rechecked after fertilizer unit installation.
- More row unit down force will be needed to maintain fertilizer wheel depth.
DEPTH (USING 10" NOTCHED BLADE)
DEPTH (USING 11" NOTCHED BLADE)
¾" BELOW DOUBLE DISC OPENERS
½" BELOW DOUBLE DISC OPENERS
¼" BELOW DOUBLE DISC OPENERS
EVEN WITH DOUBLE DISC OPENERS
¼" ABOVE DOUBLE DISC OPENERS
1 ¼" BELOW DOUBLE DISC OPENERS
1" BELOW DOUBLE DISC OPENERS
¾" BELOW DOUBLE DISC OPENERS
½" BELOW DOUBLE DISC OPENERS
¼" BELOW DOUBLE DISC OPENERS
19