Yetter 2968-026 Set-Up / Parts Manual page 17

NOTE: If installing 2968-090 Rear Knife Option, use that manual to finish installation from this point.
Step 5: Place a 5/8 flat washer over the D-bolt & install the Fertilizer Wheel Assembly to the
Fertilizer Wheel Mount Plate & tighten 5/8flange whiz lock nut. See page 19 to determine
which D-bolt hole to install the wheel assembly to achieve your desired depth.
SINGLE WHEEL (RH Shown)
Step 6: Set each Fertilizer Wheel Assembly to the desired spacing off the row (2" – 3") & then
tighten the 3) ½" bolts from STEP 4.
SINGLE WHEEL
INSTALLATION INSTRUCTIONS
DUAL WHEEL
DUAL WHEEL
WHEEL ADJUSTMENT
17