Booting The Switch 7700; Powering Up And Booting - 3Com Switch 7700 Installation Manual

Figure 26 Settings tab

6.3. Booting the Switch 7700

Before powering on Switch 7700, check that:

6.3.1. Powering up and Booting

Turn on the power for the Switch 7700 and run the BootROM program. The terminal displays the following
information:
Starting......
RAM Line....OK
System is booting.....................
C O N F I G U R I N G
Power cords have been properly connected
The voltage of power supply can meet the requirements on the switch.
The console cable has been connected properly
The PC or terminal for configuration has been started
The configuration parameters have been set.
A N D B O O T I N G S O F T W A R E
41