Agilent Technologies N4906B Serial BERT User Manual page 189

Printing
Agilent N4906B Serial BERT, User's Guide, October 2005
Configuring Printer Properties
You can change the properties of a selected printer:
1 On the File menu, click Print Setup
2 Click Configure Printer....
This opens the Printers dialog box
3 In the File menu in the Printers dialog box, select from the
following options:
– Server Properties
Click this option to change such items as printer margins, spooler
warnings and alarms, and port configurations.
– Properties
Click this option to change such items as pre-determined access
times, security items, and LAN protocols.
– Document Defaults
Click this option to change such items as pages per sheet, print
quality, paper select, and portrait vs. landscape layouts.
4 Select Close in the File menu of the Printers dialog box.
The new settings will are applied and the dialog box closes.
NOT E The printer properties and capabilities will vary depending on the
printer you have selected.
Printing Problems
You should check the following when your printer fails to print:
1 Check if the printer is turned on and the printer cable is securely
attached to both the printer and the instrument's printer connector.
2 Check if the printer driver for your printer is installed.
3 Check if the printer port is configured correctly.
For more information on printer problems, see the printer's operation
manual.
Customizing the Instrument
189