Deleting Saved Readings; Troubleshooting - Nissei WS-1011 Instruction Manual

Deleting saved readings

The readings can be deleted from the memory. The memory can be initialized only when two or more results are saved in the bank.
1 Touch to delete reading in MEMORY 1 or
memory.
2 The display will start fl ashing. Keep your fi nger on the key until the reading is replaced with «---».

TROUBLESHOOTING

SYMPTOM
Blood pressure is The cuff is not adjusted to your heart.
extremely high or low. The cuff is not wrapped appropriately.
Movement or speaking was detected.
Measured values vary all Mental and physical condition or measurement condition is infl uencing
the time. blood pressure.
Measured value is Mental condition such as nervousness at a hospital or relaxed feeling at
diff erent from that taken home is infl uencing blood pressure.
at a hospital.
Infl ation is repeated. The cuff is infl ated again when the initial pressure was insuffi cient for
blood pressure to be taken or movement was detected.
Infl ation is repeated until blood pressure is taken.
Over pressure: blood pressure could not be taken due to moving or
speaking although the cuff was infl ated to the maximum pressure.
to delete reading in MEMORY 2. Display the average reading of to delete entire readings in the
PROBABLE CAUSE
63
Remedies
Adjust the cuff to the height of your heart.
Reconfi rm how to put the cuff on your wrist.
Do not move or speak during measurement.
Make measurement under the same condition.
Take records of blood pressure taken at home and consult with your
doctor.
Repeated infl ation is not a malfunction of the monitor. Do not move or
speak during measurement.
Do not move or speak during measurement.