■
Lubricant x1
■
Wrench x2
■
Felt washer x2
■
Hitch pin x2
■
Tiller shield guard x1
■
Bolt x4
■
Nut x4
■
Outer tine A x1
■
Inner tine B x1
■
Inner tine C x1
■
Outer tine D x1
■
Harness x1
■
Operator's manual x1
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Beware of thrown or flying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
Keep feet and hands away from
rotating tines.
Wear ear protection.
Wear eye protection.
Do not expose to rain or damp
condition.
The product is not intended for use
with a toothed saw type blade.
Warning! Hot surface.
Primer bulb.
"FULL" choke position.
"HALF" choke position.
"RUN" position.
4
Allow the engine to run for 10 seconds.
Pull the starter grip until the engine
starts.
Squeeze trigger.
Press the primer bulb 10 times.
Guaranteed sound pressure level.
86.7 dB(A)
Per ANSI B175.2
Waste electrical products should not
be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or
retailer for recycling advice.
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
SYMBOLS IN THIS MANUAL
Parts or accessories sold separately
Note
Warning
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
DANGER
Indicates an imminently hazardous situation, which, if
not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not
avoided, may result in minor or moderate injury.
CAUTION
Without safety alert symbol
Indicates a situation that may result in property damage.