Transporting Lithium Batteries; Maintenance; What's In The Box; Symbols On The Product - Ryobi RCV36 Original Instructions Manual

TRANSPORTING LITHIUM BATTERIES

Transport the battery pack in accordance with
local and national provisions and regulations.
Follow all special requirements on packaging
and labelling when transporting batteries by a
third party. Ensure that no batteries can come
in contact with other batteries or conductive
materials while in transport by protecting
exposed connectors with insulating, non-
conductive caps or tape. Do not transport
battery packs that are cracked or leaking.
Check with the forwarding company for further
advice.

MAINTENANCE

WARNING! Use only original manufacturer's
replacement parts,
attachments. Failure to do so can cause
possible injury, can
performance, and may void your warranty
WARNING! Servicing requires extreme
care and knowledge and should be performed
only by a qualified service technician. Have the
product serviced only by an authorised service
centre. When servicing, use only original
replacement parts.
WARNING! Before inspecting, cleaning,
or servicing the product, turn off the product,
and wait for all moving parts to stop. Failure to
follow these instructions can result in serious
personal injury or property damage.
WARNING! Do not, at any time, let brake
fluids, gasoline, petroleum-based products,
or penetrating oils come in contact with
plastic parts. They contain chemicals that can
damage, weaken, or destroy plastic.
WARNING! The tines are sharp. Use
caution and wear heavy-duty gloves when
fitting, replacing, cleaning, or checking bolt
security.
■ You may make adjustments or repairs
described in this manual. For other repairs,
contact the authorised service centre.
■ Avoid using solvents when cleaning plastic
parts. Most plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, or
grease.
accessories, and
contribute to poor
.
■ After each use, clean the body and handles
of the product with a soft, dry cloth, and
clean the debris from the tines with a stiff
brush.
■ Check all nuts, bolts, and screws at
frequent intervals for proper tightness to
ensure that the product is in safe working
condition.
■ Only the parts shown on the replacement
part list are intended to be repaired or
replaced by the customer.

WHAT'S IN THE BOX

See page 7.
■ Cultivator x 1
■ Power head x 1
■ Top clamp x 1
■ "J" handle x 1
■ Metal cover x 1
■ Operator's manual x 1
■ Flat washer x 2
■ Hitch pin x 2
■ Nut x 4
■ Bolt x 4
■ Outer tine D x 1
■ Inner tine C x 1
■ Inner tine B x 1
■ Outer tine A x 1

SYMBOLS ON THE PRODUCT

Safety alert
Beware of thrown or flying
objects. Keep all bystanders,
especially children and pets,
at least 15 m away from the
operating area.
Read
instructions before operating
the product. Follow all warnings
and safety instructions.
Wear eye protection.
and understand all
4