Table of Contents
Advertisement
STARTING PROCEDURE
4. Hold down the throttle lock and then
squeeze the throttle trigger completely
with your left hand and keep the throttle
trigger squeezed completely. Hold the
product with one hand and use your
other hand to insert the starter drive
shaft into the engine starter housing.
Make sure the starter bit is properly
engaged.
NOTE: If the engine does not start,
repeat the procedure from setting the
choke lever to
choke position. Do not
repeat the procedure more than 1 time.
If the engine still fails to start, follow
the Starting a Cold Engine procedure
section in this manual.
If the engine does not start after
following the Starting a Cold Engine
procedure, see the solution instruction
for
the
"Flooded
engine"
"Troubleshooting" section in this manual.
5. Hold down the throttle lock and then
squeeze the throttle trigger to start using
the product.
16
4
1
5
in
the
2
1
2
4
4s
4s
3
Advertisement
Table of Contents
