Recommended Settings; Standard Parameter Settings, Recommended Setting Ranges - Rotex Solaris RPS3 P2 Operating And Installation Manual

5 x Operation
5.4

Recommended settings

5.4.1 Standard parameter settings, recommended setting ranges

The following table summarises the factory settings and the possible and recommended setting ranges of the Solaris system
parameters.
Parameter
Delta T on
Delta T off
T max
S
Time PsE
Time PsA
Time UB
Time Sp
T max
K
T zul
K
T min
R
H/A
FLS active
P min
T min
S
Time VBSK
Cycle
Baud rate
Table 5-5 Parameter overview
38
Designation
Cut-in temperature difference
Cut-out temperature difference
Maximum storage tank
temperature
Tank circulation pump cut-in
delay
Tank circulation pump cut-out
delay
Reverse condition delay time
Pump block time
Booster temperature
(maximum solar panel
temperature)
Cut-in protection temp.
(max. approved operating
solar panel temp.)
Minimum temperature storage
tank
Automatic reset from manual
to automatic mode
FlowSensor activation
Minimum instantaneous output
for burner stop
Minimum temperature for
burner stop
Delay burner inhibit contact
Cycle of data output (serial
interface RS 232)
Step speed of data output
The system parameters at start-up must be set individually to the installed system situation and if necessary
optimised during operation. In general, the system operates with the factory settings.
Access level Setting range Recommended
BE FA
x x 1...80
(>"Delta off")
x x 1...20
(>"Delta on")
x x 20 to 85 °C
x x 0 to 600 s
— x 0 to 600 s
— x 0 to 600 s
— x 0 to 600 s
i x 20 to 110 °C
i x 90 to 250 °C
— x 0 to 10 °C
i x 1 to 900 min
no /
i x 20 to 100
i x 0.0 to 99.9 kW
i x 0 to 99 °C
— x 10 to 600 s
— x 0 to 300 s
— x 2400, 4800,
9600, 19200
BE User
FA Specialist
Factory
adjustment setting
range
10 to 15 K 15 K
2 to 5 K 2 K
75 to 85 °C 80 °C
20 to 40 s 35 s
15 to 30 s 20 s
5 to 20 s 5 s
— 30 s
— 75 °C
— 110 °C
— 0 °C
— 30 min
FLS 1.3: 20 without FLS: no
with FLS: 20
FLS 2.0: 40
FLS: 5.0: 100
— 99.9 kW
— 99 °C
— 120 s
— 0
— 19200
x Adjustable
i Informative
— Not available
FA ROTEX Solaris RPS3 P2 - 06/2012
Increment
1 K
1 K
1 K
1 s
1 s
1 s
10 s
1 K
1 K
1 K
1 min
no, 20, 40,
100
0.1 kW
1 K
10 s
5 s
—