Electrolux EEC5700 User Manual page 15

Description
1 RESIDUAL HEAT INDICATOR
2 CLEANING REMINDER
1)
3
KEY TONE
4 FAULTY TONE
5 SERVICE MENU
6 RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is deactivated,
touch and hold
The display shows SET1 and "1" flashes.
2. Touch
or
3. Touch .
4. Touch or
of the setting.
5. Touch .
9.5 Automatic Switch-off
For safety reasons the appliance
deactivates automatically after some time
if an oven function operates and you do
not change any settings.
Temperature (°C) Switch-off time
30 - 115
120 - 195
200 - 245
250 - maximum
After the Automatic switch-off, touch a
sensor field to operate the appliance
again.
The Automatic switch-off
does not work with the
functions: Light, Slow
Cooking, Duration, End, Time
delay.
for three seconds.
to set the setting.
to change the value
(h)
12.5
8.5
5.5
1.5
Value to set
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
-
ON / OFF
9.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.
9.7 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.
9.8 Safety thermostat
Incorrect operation of the appliance or
defective components can cause
dangerous overheating. To prevent this,
the oven has a safety thermostat which
interrupts the power supply. The oven
activates again automatically when the
temperature drops.
ENGLISH 15