Honeywell RMA801 User Manual page 38

PV Value
For notes on PV,
see section 7.3.1
UNIT /
B UNIT
27
User configurable.
This field has 6 characters.
Maximum allowable numeric value of 999999 or -999999.
If fractional decimals are configured, the fractional positions will be
dropped as required.
If the PV exceeds the values above limits, the PV is divided by 1000 and
"K" is appended to the result, allowing a maximum value with multiplier of
9999K or -9999K
Note: After device mode is changed to analog from digital, device should
be power cycled for RMA to display analog mode
User configurable. This field has 8 characters
Pressure:
inH2O@39° F
mH2O@4° C
cmH2O@4° C
torr
mmH2O@68° F
ftH2O@68° F
inH2O@68° F
inH2O@60° F
atm
Pa, kPa, MPa
gf/cm2, kgf/cm2
psi
mbar, bar
inHg@0° C
mmHg@0° C
mmH2O@4° C
RMA803 Remote Indicator User's Guide
Temperature:
o C Choose appropriate
o
F engineering units from
o
R list as per Pressure or
K Temperature PV
mV selection.
Ohm
Revision 2