Status Code - Honeywell Air Alert 96d User Manual

Status Code
These screens display transmission or node status and sensor status
for the selected transmitter. This read‐only information can assist ser‐
vice personnel in troubleshooting.
The XNX and XCD gas detectors will report the warning or fault num‐
ber (iFaultWarnNumber) in hexidecimal on the third line. These
transmitters will also report the monitoring state (iMonitoringState) in
the fourth line. See the transmitter documentation for interpretation
of fault numbers and monitoring states.
Typical display for XNX or XCD
Typical display for other transmitters
34