How To Verify Igmp Snooping Function - Ralink RT2880 User Manual

extern u32 mii_mgr_write( unsigned int, unsigned int, unsigned int);
mii_mgr_write( [port_no], [reg_addr], [value])
NOTES: IF BOTH RT305X SWITCH AND REMOTE PEER DO NOT USE THE SAME CONFIGURATION
(I.E. AUTO-NEGOTIATION OR FORCE MODE) IT CAN CAUSE A PROBLEM.
11.25

How to verify IGMP snooping function

Step1: Compiling IGMP proxy application.
#make menuconfig
Kernel/Library/Defaults Selection --->
[*] Customize Vendor/User Settings (NEW)
Network Applications --->
[*] igmp proxy (RFC4605)
Step2: Enable IGMP Proxy in WebUI.
Step3: Install windows server 2003 resource kit tools in your PCs.
You can get the test application from the following link or Ralink SDK.
- HTTP://WWW.MICROSOFT.COM/DOWNLOADS/DETAILS.ASPX?FAMILYID=9D467A69-57FF-4A
E7-96EE-B18C4790CFFD&DISPLAYLANG=EN
- RT288x_SDK/source/user/igmpproxy/tools/rktools.exe.
RALINK AP SDK 3.3.0.0 User's Manual
Page 92 of 93