2: Load system code then write to Flash via TFTP
3: Boot system code via Flash (default)
4: Enter boot command line interface
5: Load ucos code to SDRAM via TFTP
You chose 9
9: System Load Boot Loader then write to Flash via TFTP.
Warning! Erase Boot Loader in Flash then burn new one. Are you sure? (Y/N) Please Input new
ones /or Ctrl-C to discard
Input device IP (10.10.10.123) ==:
Input server IP (10.10.10.99) ==:
Input Uboot filename (uboot.bin) ==:
RALINK AP SDK 3.3.0.0 User's Manual
Page 26 of 93