How To Enable Nfs Client - Ralink RT2880 User Manual

7:0 RESERVED
User Space:
# mii_mgr -s -p 0 -r 0 -v
Set: phy[0].reg[0] = 3900
# mii_mgr -s -p 1 -r 0 -v
Set: phy[1].reg[0] = 3900
# mii_mgr -s -p 2 -r 0 -v
Set: phy[2].reg[0] = 3900
# mii_mgr -s -p 3 -r 0 -v
Set: phy[3].reg[0] = 3900
# mii_mgr -s -p 4 -r 0 -v
Set: phy[4].reg[0] = 3900
Kernel Space:
extern u32 mii_mgr_read( unsigned int , unsigned int, unsigned int *);
extern u32 mii_mgr_write( unsigned int, unsigned int, unsigned int);
mii_mgr_write( 0, 0, 0x3900) //set port 0 register0 bit11
mii_mgr_write( 1, 0, 0x3900) //set port 1 register0 bit11
mii_mgr_write( 2, 0, 0x3900) //set port 2 register0 bit11
mii_mgr_write( 3, 0, 0x3900) //set port 3 register0 bit11
mii_mgr_write( 4, 0, 0x3900) //set port 4 register0 bit11
You also need to set POC[27:23] to disable Phy port.
RT288x_SDK/source/linux-2.6.21.x/drivers/net/raeth/rather.c)
*(unsigned long *)(0xb0110090) = 0x0??07f7f;
11.14

How to enable NFS client

0x3900 //set port 0 register0 bit11
0x3900 //set port 1 register0 bit11
0x3900 //set port 2 register0 bit11
0x3900 //set port 3 register0 bit11
0x3900 //set port 4 register0 bit11
Page 73 of 93
RALINK AP SDK 3.3.0.0 User's Manual
RO 8h00