How To Enable Usb Automount On The Rt305X Platform; How To Enable Software Qos - Ralink RT2880 User Manual

[*]
[ ]
CAUTION: THE KERNEL SIZE CANNOT BE BIGGER THAN THE MTD KERNEL PARTITION SIZE IN
ROOTFS IN FLASH MODE.
#=============================================================
# Original Kernel Image Size
1033369 /home/steven/rt3052/RT288x_SDK/source/images/zImage.lzma
# Padded Kernel Image Size
1048512 /home/steven/rt3052/RT288x_SDK/source/images/zImage.lzma
# Original RootFs Size
................
11.18 How to enabl e USB automount on the RT305x pl atform
#make menuconfig
Kernel/Library/Defaults Selection --->
[*] Customize Busybox Settings
Linux System Utilities --->
[*] mdev
[*] Support /etc/mdev.conf
[ ] Support subdirs/symlinks (NEW)
[*] Support command execution at device addition/removal
[*] Customize Vendor/User Settings
Miscellaneous Applications --->
[*] ntfs-3g
11.19 How to enabl e software QoS
To support the Ralink SW QoS, many menuconfig options in Ralink SDK must be enabled,
including in kernel and application configs.
Kernel IMQ config:
HOST ONLY MODE
DEVICE ONLY MODE
Page 78 of 93
RALINK AP SDK 3.3.0.0 User's Manual