Spicmd; I2Ccmd; Script; Goahead - Ralink RT2880 User Manual

a. nvram_get 2860 SSID
b. nvram_set 2860 SSID ralink /* set the SSID to ralink */
c. ralink_init gen 2860
d. ralink_init show inic
e. ralink_init renew 2860 ra.dat
ra.dat file */
f. nvram_daemon

8.1.8 SPICMD

Description: SPI Toolkit for SPI EEPROM Read/Write Program...
Usage: spicmd read/write parameters
Note:
spicmd read the address
spicmd writes the size address value
size is 1, 2, 4 bytes

8.1.9 I2CCMD

Description: I2C Toolkit for EEPROM Read/Write via I2C Interface...
Usage: i2ccmd read/write parameters
Note:
i2ccmd read the address
i2ccmd write the size address value
size is 1, 2, 4 bytes

8.1.10 Script

Description: WebUI configuration script.
Usage: Refer to the script help message.

8.2 goahead

Source code: RT288x_SDK/source/user/goahead/
Description: WebUI reference design of the AP/Router Solution.

8.3 nvram library

Source code: RT288x_SDK/source/lib/libnvram
Description: Library for nvram_get, nvram_set and ralink_init.
/* get the SSID */
/* generate the RT2860 .dat file from NVRAM */
/* display the INIC configurations in NVRAM */
/* set NVRAM values for RT2860 platform according to
/* start the nvram_daemon */
Page 33 of 93
RALINK AP SDK 3.3.0.0 User's Manual