Ralink RT2880 User Manual page 41

3. Go out of the configuration menu and save the new kernel configuration.
The script gets all user/kernel default settings back. The subsequent message is shown after
getting the default settings back.
*** End of Linux kernel configuration.
*** Check the top-level Makefile for additional configuration.
*** Next, you must run 'make dep'.
Note: The default configuration file is stored in a different file, referring to the 'Flash/DRAM size'
settings. Go to RT288x_SDK/source/vendors/Ralink/{RT2880/RT3052/RT3883}/config to see all
the default setting files.
a. Busybox default configuration files
2M_16M_config.busybox-2.4.x/2M_16M_config.busybox-2.6.21.x
4M_16M_config.busybox-2.4.x/4M_16M_config.busybox-2.6.21.x
8M_16M_config.busybox-2.4.x/8M_16M_config.busybox-2.6.21.x
b. User application default configure file
2M_16M_config.vendor-2.4.x/2M_16M_config.vendor-2.6.21.x
4M_16M_config.vendor-2.4.x/4M_16M_config.vendor-2.6.21.x
8M_16M_config.vendor-2.4.x/8M_16M_config.vendor-2.6.21.x
c. uClibc default configure file
RALINK AP SDK 3.3.0.0 User's Manual
Page 41 of 93