Version History - Ralink RT2880 User Manual

2

VERSION HISTORY

Release Features
1.2 Initial release
1.3 WebUI – NTP/DDNS, iNIC
I2C, SPI, GPIO Linux driver
2.0 Squashfs tools installation
WebUI - save/restore configure. WPS , factory default
WebUI – STA, Ethernet Converter mode
2.2 WebUI - Operation Mode reorganization
How to downsize image
2.3 How to control GPIO and LED
Install mksquashfs Utility
Describes Uboot configuration file
Add new parameter in default setting
2.4 WebUI – How to save the configurations to the flash
3.0 Updated for RT3052
Chapter Re-organization
3.1 Update default parameter for LED firmware
Update GPIO definition for RT3052 platform
Update FAQ
3.2 Reorganize user manual
Update FAQ
-How to enable NFS Client
-How to add new language to webUI
- How to Power down rt305x Ethernet ports
- How to enable USB storage in RT305x platform
-How to enable USB automount in RT305x platform
3.3 Update FAQ
-How to enable software QoS
- How to enable USB Ethernet
- How to build a single image for the RT2880 8M flash
platform
- How to start printer server
-How to force link speed
3.4 - How to burn SPI Uboot firmware
-How to enable new watchdog
RALINK AP SDK 3.3.0.0 User's Manual
Page 12 of 93
Date Author
Steven Liu
Steven Liu
Steven Liu
Steven Liu
Steven Liu
Winfred Lu
Steven Liu
Steven Liu
Steven Liu /
Winfred
Steven
Steven