Ralink RT2880 User Manual page 83

4. Select reserved bandwidth. The reserved bandwidth is out of the control of Ralink SW
QoS.
Group settings:
Four QoS groups are shown after specifying Global settings in Ralink SW QoS. Now all
packets through this gateway are classified into these four QoS groups according to the
user's QoS rules settings. The four QoS groups are subsequently shown.
The default group is the group named Default(the third group), that means the packet
would be classified into this group if it doesn't match with any rules.
In each QoS group there are two attributes Rate and Ceil as shown in the subsequent
figure.
RALINK AP SDK 3.3.0.0 User's Manual
Page 83 of 93