Component Description For Oil Pump - Mercedes-Benz OM 471 Introduction Into Service Manual

GF18.10>W>4000H
ENGINE 471.9 in MODEL 963
Location
1 Oil pump
2 Oil pan
3 Oil strainer
4 Oil drain screw
5 Oil intake manifold
6 Suction pipe
7 Return flow check valve
8 Pressure line
B605 Engine oil fill level sensor
The oil pump (1) is located in the oil pan (2) at the output side of
the engine.
Task
The oil pump (1) supplies the oil circuit of the engine with engine
oil. It ensures that engine oil is available under all operating
conditions in adequate quantities and at the required pressure at
the respective locations.
Body
Rear
1 Oil pump
9 Drive gear
10 Pressure control valve
11 Oil inlet
12 Safety valve
13 Oil outlet
Oil duct > to pressure regulator valve (10)
14
i Introduction of engine OM 471 and exhaust aftertreatment > 09/2011 >

Component description for oil pump

– This printout will not be recorded by the update service. Status: 09 / 2011 –
System components
20.7.11
W18.10>1044>11
W18.10>1045>11
189