Table of Contents
Advertisement
15
Time Synchronization Data
The Time synchronization Data view of the configuration dialog box is used to
specify the source for time synchronization data. Synchronization is necessary
for measurements such as Keysight Time Difference of Arrival (A-TDOA.) The
possible time synchronization sources are:
IEEE 1588 – Network-based precision time protocol. Selecting this
option enables the "1588 Data" view at the bottom of the dialog box.
GPS – GPS-based timing protocol.
GPS /1588 GM– The sensor will gain its timing from GPS and
provide timing to other sensors on the LAN via IEEE-1588.
None – No time protocol.
The SMS Time Offset shows the difference of the sensors' sense of time and
that of SMS.
The UTC offset is visible in the next field, and can be edited.
The values on this panel can be updated using the "Refresh Status" button.
Location Data
The Location Data view of the sensor configuration dialog box is used to view
and manually set the sensor's location data. Use this view when the sensor's
GPS receiver is not active, such as when a sensor is located indoors, or the
sensor location has poor GPS reception.
RF Sensor User Guide
Advertisement
Table of Contents
