Table of Contents
Advertisement
9
Each entry in the sensor list is headed by a sensor icon. A green icon indicates
that the SMS has recently received a status message from the sensor and that
it is generally functional. A gray icon indicates that the SMS has not received a
status message from that sensor for a predetermined time period. A red icon
indicates that SMS has detected a problem with that sensor.
Adding a Sensor that is not on the Local Subnet
To add an RF Sensor that is not on the local subnet (and is therefore not
discoverable by the SMT), the sensor's IP address must be known.
If the sensor's IP address is known, use the following procedure.
1.
Click Tools > Add sensors....
2.
Select Configure a sensor with a known host name or IP address.
3.
Click Next.
4.
Enter the IP address in the text entry box
5.
Click the Validate button.
6.
When SMT has validated that it can communicate with a RF sensor at
the IP address, the Next button becomes active. Click Next.
7.
In the text entry box, enter a descriptive name for the sensor.
8.
Click the Finish button to save the entry and to place the sensor in
the All Sensors list.
RF Sensor User Guide
Advertisement
Table of Contents
