Running The Rf Sensor's Self-Test - Keysight Technologies N6841A User Manual

Running the RF
Sensor's Self-Test
31
Since the Keysight RF Sensor has no external switches, lights, or other
indicators, the SMT can provide diagnostic and self-test methods for verifying
sensor communication and operation. These are functions are available
through the Sensor's pop-up menu and the Tools menu.
To use the diagnostic tools through the Tools menu, click:
Tools>Sensor>Diagnostic/Self-Test.
To use the diagnostic tools through the sensor pop-up menu, click
Diagnostic/Self-Test. SMT displays the following dialog box.
Beep Sensor
Clicking this button provides a quick way to verify that the SMT and sensor are
communicating, and that the sensor has power and is not hung. Enter the
number of times the sensor should beep in the text box, then click the Beep
Sensor button.
Ping Sensor
Clicking this button sends an "echo request" packet to the sensor and displays
the results of the operation.
RF Sensor User Guide