Objective - Leica M125 C User Manual

Objective

Tools used
No tools required.
O
Preparation
1. Remove the protective cap on the optics
carrier by turning it.
Leica M Series User Manual
Attaching the objective
•
Hold the objective firmly during assem-
bly and disassembly so that it does not
fall onto the stage plate. This applies particu-
larly to the 2× planapochromatic objective,
which is very heavy. Remove all specimens from
the stage plate first.
2. Screw the objective clockwise into the
optics carrier.
Assembly
Alternative fastening options
If using the objective nosepiece, read the
O
instructions on page 25.
If using the AX carrier, read the instructions
O
on page 27.
24