Leica Isopro Manual Xy Stage: Assembly - Leica M125 C User Manual

Leica IsoPro Manual XY Stage: Assembly

IsoPro XY stage
Before the IsoPro XY stage is mounted to the
base, the axis containing the control buttons is
attached either on the left or the right side of
the XY stage.
If the controls are to be mounted on the
left-hand side, the gear rod on the bottom
side of the XY stage must be unscrewed and
reattached in reverse.
1. Take the glass plate from the XY stage.
2. Turn the XY stage around and place it onto
a non-slip surface.
3. Change the gear rod from the left to the
right-hand side.
4. Skip the next two steps to mount the
controls.
Leica M Series User Manual
Before the IsoPro XY stage is mounted to the
base, the axis containing the control buttons is
attached either on the left or the right side of
the XY stage.
Assembly
Left or right operation
If the controls are to be mounted on the
left-hand side, the gear rod on the bottom
side of the XY stage must be unscrewed and
reattached in reverse.
31