Leica Led5000 Rl - Leica M125 C User Manual

Leica LED5000 RL

Use
The Leica LED5000 RL ("Ring Light") generates
a very bright and homogenous incident light.
It has a diameter of 80 mm and illuminates the
specimen with 48 LEDs that can be switched on
and off completely or in various combinations.
It is controlled using either the integrated or via
the Leica Application Suite X (LAS X).
LAS X enables you to create fully reproducible
illumination scenarios and automatically toggle
between them. For additional information,
refer to the LAS X online help.
Leica M Series User Manual
Using the keyboard
Use the key to switch the illumination on
O
or off.
Use the "+" and "–" keys to adjust the
O
brightness in 10 increments. Touch either
of the two buttons to adjust the intensity in
small increments. Hold a key to change the
intensity more quickly.
System Illumination
The illumination scenarios
Use the " " and " " keys to toggle between the
illumination scenarios shown below.
Constraint
The Leica LED5000 RL has been designed for
use with the 1.0× and 0.63× objectives. For the
1.6× and 2.0× objectives, conventional ring
illuminators from the Leica illuminator product
range are available.
85