Safety Instructions; Safety Instructions Regarding The Motor; Additional Information - ELCOM TLM 1000 User Manual & Maintenance Manual

Modular transfer system

Table of Contents

1.5 Safety instructions

Safety rules regarding transfer systems, especially the ones regarding the electrical

devices, must be followed during all the use phases: mounting, transport, production.

Disregarding these rules would be regarded as a wrong use of the machine.

Using the transfer system in an explosive atmosphere can have a negative impact on the

transfer system and is strongly discouraged.

Never perform any maintenance on your own. Another worker must be present at all

time in order to shut the power down or perform first aid actions if needed.

Changing the motor position or removing security parts must only be done when the

transfer system is unplugged from any power supply.

When carrying maintenance or handling tasks while the transfer system is operating (belt

tension setting), take care not to slide your hand between the belt and the belt support

in order to avoid any accident.

All the different types of positioning units include several mobile parts driven by

pneumatic cylinders. Therefore, they must be well protected in the end-user machine in

order to avoid any risks of pinching or squashing. We recommand to mount a protective

housing around it. In case of manual shift, the final machine can not be used without the

protections installed at the indexing and stop station

In case of a power failure, turn off the transfer system: it could restart automatically

when the power comes back which could cause damages and even injuries to the

operator.

These instructions aim at ensuring the safety of the people and the proper functioning of the transfer

system. If you wish to use the transfer system in any other conditions, please do not hesitate to

Other information is available on our website, in the documentation section:

http://elcom-automation.com/transfers/documentation

I02-118 User manual & maintenance guide

of TLM 1000

Version 04

(translation of the original manual)

Page 2 sur 25

Table of Contents

Do you have a question about the TLM 1000 and is the answer not in the manual?