Engine Oil Recommendation - TOHATSU MFS 2.5B Owner's Manual

22
PRE-OPERATING PREPARATIONS
1. Before opening fuel tank cap, turn air
vent screw two times counterclock-
wise to release air pressure in the fuel
tank.
1
1. Air vent screw
2. Fuel tank cap
6
2. Open the fuel tank cap slowly.
3. Fill the fuel not to over the shown
level.
1. Full line
4. After filling the tank, close the tank
cap.
ENOM00037-A

3. Engine oil recommendation

ENOW00022-A
The engine oil is drained for shipping from
the factory. Be sure to fill the engine to the
proper level before star ting engine. ( To
2
ENOF00209-A
1
ENOF00210-0
CAUTION
properly fill the engine with oil follow the
instructions, See page 45)
Use only high quality 4-stroke engine oil
to insure performance and prolonged
engine life.
The SAE oil viscosity 10W-30 or 10W-40
outboard motor engine oil is recom-
mended.
You can also use oils that carry the API
rating of SH, SJ, or SL. Select the appro-
priate viscosity, based on atmospheric
temperature, from the chart below.
10W−40
10W−30
-30 -20 -10 0
-22 -4 14 32 50
ENOW0002A-A
CAUTION
Use of engine oils that do not meet these
requirements will result in reduced engine
life, and other engine problems.
ENOF00240-0
10 20 30 40 ˚C
68 86 96 ˚F
ENOF00208-0