Add I/O Modules To Your Network - Allen-Bradley 1734-IJ User Manual

4-2 Configure Your Module
1. Click here to expand the list
of communication adapters.
2. Double-click here to choose
the scanner. You can also
click and drag the scanner
name onto the network.
Make sure you choose the
1734-ADN Point I/O Scanner.
1. Click here to expand the list
of Specialty modules.
2. Double-click on the catalog
number to choose the
module. You can also click
and drag the module name
onto the network.
Publication 1734-UM006B-EN-P - August 2005
2. Add the communication device as shown below. (In this case,
the chosen device was a 1734-ADN DeviceNet Scanner.)
The scanner must always exist on the DeviceNet
IMPORTANT
network at Node 00.

Add I/O Modules to Your Network

After you add the communication device, you must add the POINT
I/O modules connected to the scanner on the PointBus.
1. Add modules as shown below. (In this case, the communication
device shown is a 1770-KFD.)
.
The scanner appears
on the network.