14
Installation and Wiring
Publication 1761-UM004B-EN-P - June 2006
Wire to the Network Ports
Use these instructions for wiring Belden cable.
Attach the RS-485 Connector to the Communication Cable
A daisy-chained network is recommended. Other chained
IMPORTANT
networks are not recommended.
Daisy-chain Network
Belden
#3106A or
#9842
Connector
Attach the connector to the Belden #3106A or #9842 cable as shown
below.
Single Cable Connection
Orange with White Stripes
White with Orange Stripes
Shrink Tubing
Recommended
Blue (#3106A) or
Blue with White Stripes (#9842)
Multiple Cable Connection
to Successive Device
Belden
#3106A or
#9842
Connector
Connector
Incorrect
6 Termination
5
4
3 Common
2 Shield
1 Chassis Ground
Drain Wire
to Previous Device
Belden
#3106A or
#9842
A
B