Install The Modules; What This Chapter Contains; Before You Begin - Allen-Bradley 1734-IJ User Manual

What This Chapter Contains

Before You Begin

1
Install the Module
Read this chapter for information about how to install Encoder/
Counter modules.
For information about how to
Before You Begin
Install the Mounting Base and Wiring Base Assembly
Install the Module
Install the Removable Terminal Block
Remove a Mounting Base
Wire the Modules
Communicate with Your Module
Preventing Electrostatic Discharge
ATTENTION
This equipment is sensitive to electrostatic discharge,
which can cause internal damage and affect normal
operation. Follow these guidelines when you handle
this equipment:
AB Drives
• Touch a grounded object to discharge potential
static.
• Wear an approved grounding wriststrap.
• Do not touch connectors or pins on component
boards.
• Do not touch circuit components inside the
equipment.
• If available, use a static-safe workstation.
• When not in use, store the equipment in
appropriate static-safe packaging.
Publication 1734-UM006B-EN-P - August 2005
2
Chapter
See page
2-1
2-1
2-4
2-6
2-6
2-7
2-9