Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Amico AC-200C
Summary of Contents for Amico AC-200C
- Page 1 Operating & Maintenance Manual AC - 200C...
-
Page 2: Table Of Contents
Contents Intended Use Introduction Features Warning Siderail Controls Installation and Removal of the Head/Foot Board Installing the Head/Foot Board Removing the Head/Foot Board Siderails Lowering the Siderails Raising the Siderails Central Locking System Locking the Bed Unlocking the Bed Using the CPR Release Lever Electrical Standard Features Troubleshooting... -
Page 3: Intended Use
This Manual provides instructions required for normal operation of the AC 200 bed from Amico Beds Corporation. Prior to operation of this bed, it is important that this manual is read and ensure that all safety aspects contained in this manual are strictly adhered to. -
Page 4: Features
Avoid sitting at the extreme ends of the bed (back rest and knee gatch) • It is recommended not to use water or silicone surfaces in order not to exceed the maximum weight limit of 550 lbs (250 kg) Amico Beds Corporation... -
Page 5: Siderail Controls
Power Button Press on power button before pressing on any other buttons for bed motions Flat Position Press on this button to place the bed in flat position Night Light Press on this button to activate the night light www.amico.com... -
Page 6: Installation And Removal Of The Head/Foot Board
NOTE: Patients should be monitored intermittently to ensure correct patient positioning on the bed and proper usage of siderails. Amico Beds Corporation... -
Page 7: Central Locking System
This product also comes with a battery backup system which is made up of two sealed lead-acid 12 V battery located in the control unit box. The AC 200 features two exterior siderail controls and two interior siderail controls. www.amico.com... -
Page 8: Standard Features
Measure voltage level and drops too quickly if so, proceed to have batteries replaced. If the above troubleshooting step are not working, contact your Amico Sales Executive for support. Siderail controls stop working upon... -
Page 9: Preventive Maintenance
Failure to rinse and dry the product will leave a corrosive residue on the surface possibly causing corrosion. Failure to follow the above directions may void the product’s warranty. www.amico.com... -
Page 10: Mattress Cleaning Instructions
Set the bed on brake by pressing on the brake pedals to the Brake position During Cleaning • Do not use abrasive cleaning products • Do not use oil based products • Do not use a steam cleaner, washing tunnel, high-pressure spray or hose Amico Beds Corporation... -
Page 11: Technical Specification
Furthermore, Amico Beds Corporation will warrant its material to be free from defect for an additional period of two (2) years (three (3) years from the date of shipment). Within this period, Amico Beds Corporation will replace any part which is proven to be defective, at no charge. - Page 12 Amico Beds Corporation | 85 Fulton Way, Richmond Hill, ON L4B 2N4, Canada Toll Free Tel: 1.877.462.6426 | Tel: 905.764.0800 | Fax: 905.764.0862 Email: info@amico.com | www.amico.com TTS-OM-AC200C 10.23.2018...
Need help?
Do you have a question about the AC-200C and is the answer not in the manual?
Questions and answers